Adafruit PyPortal Titano Base

I needed a something to keep my PyPortal Titano steady. I also wanted to keep components and pins from potentially shorting out if I set the Titano down on something conductive.

I wasn't happy with my designs for a full case so I came up with this simple platform/base in Fusion 360 (F3Z included in the files). The design includes cutout areas over the reset button + activity LED and the micro SD card slot.

Printing

Dead easy. Should work in any material, on any printer with pretty much any nozzle size. No supports needed.

Use

The base mounts to the Titano via four 2.5mm screws. Screw length should be in the range of 4 to 10mm or so. As designed the holes will need to be tapped so make sure you have a 2.5mm tap on hand!