Standard F-11D TFA to TLJ conversion parts

Modified versions of some files from the below TFA blaster to make it more accurate to a TLJ blaster.  This applied to the standard version, not the heavy or Phasma variants.

https://www.whitearmor.net/forum/topic/45171-first-order-f-11ds-the-force-awakens/

Research thread is here: https://www.whitearmor.net/forum/topic/43034-tlj-f-11d-photos/ 

Changes

• Rear barrel has the depressed “ring” removed
• Rear barrel cocking slide moved to other side of barrel. Cocking lever is not present anymore.
• Front barrel has 2 extra holes on the top of the barrel.
• End cap has had the lip removed from the cut out.
• End cap clip has had one end squared off a bit.
• Additional picatinny rail and mount.

You will need 2 M3 bolts/screws to to first attach the mount to the blaster. You will want to pre drill your blaster for these.

You will also need 2 M4x12mm black countersink machine screws to then join the rail to the mount.

This should be accurate to NATO specs and be able to mount the accessory light but I am yet to test it.

MODS.zip

This contains a small number of files that have further mods from the above to aid with fitting switches and wiring etc for electronics.  This includes extra hollowing, holes for wiring, mounting screw points and in the magazine mount space for a slide switch in about the same place as the screen used items. 

There is a hole in Barrel Rear 2 - MOD.3mf which is for a micro switch, to be actuated by the custom trigger also included.  The two holes in the side are for grub screws that to secure this.

These are very much aimed at my own personal build but may be of use to some.