{"data":{"model":{"id":"238120","slug":"basic-backpack-camera-dslr-mount-quick-release","name":"Basic Backpack Camera DSLR Mount quick release","authorship":null,"club":false,"excludeCommercialUsage":false,"price":null,"eduProject":null,"ratingAvg":"0","myRating":null,"ratingCount":0,"description":"

This is a part to mount a camera to the shoulder strap of a backpack so it can be accessed quickly. It consists of a part that is screwed to the camera and two parts that clamp around the shoulder strap.

It is not wide enough to be mounted around the entire shoulder strap including the cushioning. My backpack has a strap on top of the cushioning that I mounted the parts to. Depending on the softness of your cushioning, the weight of your camera and how the parts of your backpack are sewed together, the camera will wobble sideways quite a bit. If you don\u2019t want that, you might want to use a wider mounting mechanism than the one I designed here.

The plate that mounts onto the camera is not compatible with any quick release tripod plates, but it is designed to be easy to unscrew by hand. So you can just unscrew the plate and screw the camera on a tripod.

The part includes a bistable print in place locking mechanism that latches in the locked or unlocked state.

Additional Hardware needed:

4x m3 nut
4x m3x10 countersunk bolt
short \u00bc\" hex bolt
piece of 1 mm self-adhesive silicone

Assembly:

put the nuts in their spots in the main plate
place the backpacks trap between the main plate and the back plate and screw them together from the back using the four countersunk bolts
cut out a piece of silicone, stick it to the camera plate, and trim it to its final size with a knife
drill a hole for the camera screw through the silicone
put the camera screw in the camera plate and screw it to the camera
if the lens is not aligned with the camera plate, unscrew the plate, remove the bolt, rotate it as needed, put it back in the plate and screw it back to the camera

Printing:

I printed all parts in (Prusament) ASA without support material. I printed them with a 1.05 extrusion multiplied in the slicer for maximum strength.

If you wanted or needed to modify my parts, you could download the .f3d file and edit it in Fusion 360.

","category":{"id":"26","path":[{"id":"21","name":"Gadgets","nameEn":"Gadgets","description":"Everyone loves smart gadgets. Use 3D printing to make amazing items for audio, photo & video, computers, and phones. Top models are ready to download for free.","__typename":"CategoryType"},{"id":"26","name":"Photo & Video","nameEn":"Photo & Video","description":"Get ready for your next photo adventure! Save money with printed photo gadgets - GoPro or camera mounts, OCF grids and diffusers, lens adapters or tripods.","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2022-07-31T21:19:54.563587+00:00","firstPublish":"2022-07-31T17:17:59.661636+00:00","datePublished":"2022-07-31T17:17:59.661636+00:00","dateCreatedThingiverse":null,"nsfw":false,"aiGenerated":false,"politicalContent":false,"summary":"Very Basic Backpack Camera mount with locking mechanism, not compatible with any qick release plates","likesCount":86,"makesCount":0,"liked":null,"printDuration":null,"numPieces":0,"weight":null,"nozzleDiameters":null,"usedMaterial":null,"layerHeights":null,"mmu":false,"materials":[],"dateFeatured":null,"downloadCount":277,"displayCount":3016,"filesCount":4,"privateCollectionsCount":68,"publicCollectionsCount":70,"pdfFilePath":"media/prints/238120/pdfs/238120-basic-backpack-camera-dslr-mount-quick-release-47766dd7-4a7e-44eb-8e1a-e78d2955275a.pdf","commentCount":0,"userGcodeCount":0,"remixCount":0,"canBeRated":false,"addMakePermission":null,"printer":null,"image":{"id":"1113824","filePath":"media/prints/238120/images/2259165_bb748049-7ba4-4272-9c0d-187cab94720e/dsc_0015.jpg","rotation":0,"imageHash":"UtcFFwT2oWeipXZOWHh4eId3BDV7YLQI","imageWidth":4000,"imageHeight":4000,"__typename":"PrintImageType"},"images":[{"id":"1113824","filePath":"media/prints/238120/images/2259165_bb748049-7ba4-4272-9c0d-187cab94720e/dsc_0015.jpg","rotation":0,"imageHash":"UtcFFwT2oWeipXZOWHh4eId3BDV7YLQI","imageWidth":4000,"imageHeight":4000,"__typename":"PrintImageType"},{"id":"1113829","filePath":"media/prints/238120/images/2259164_8fdef578-c228-42ec-9e7a-b09183c964c6/dsc_0023.jpg","rotation":0,"imageHash":"2fcZDYK/d4eId4d4d4h3eI+q86kq","imageWidth":6000,"imageHeight":4000,"__typename":"PrintImageType"},{"id":"1113830","filePath":"media/prints/238120/images/2259166_ecc92d8f-4d57-439f-8a50-e2eebed7e5ec/dsc_0028.jpg","rotation":0,"imageHash":"3fcZDYKQd3mJhnh5h3iIhxCbCKGZ","imageWidth":6000,"imageHeight":4000,"__typename":"PrintImageType"},{"id":"1113827","filePath":"media/prints/238120/images/2259167_b5358302-6276-49c7-bfe5-f334a65fcd95/img_1968.jpg","rotation":0,"imageHash":"DNcFDYATb7NbtVegLDi6iQa6a5C6","imageWidth":5184,"imageHeight":3456,"__typename":"PrintImageType"},{"id":"1113828","filePath":"media/prints/238120/images/2259168_6695f3ac-152b-4fc7-955d-40010cef3e37/dsc_0003.jpg","rotation":0,"imageHash":"2igSHYSVmHePh3eWZ4aHeLR/V/t3","imageWidth":6000,"imageHeight":4000,"__typename":"PrintImageType"},{"id":"1113825","filePath":"media/prints/238120/images/2259163_837029b8-f593-4d2e-a352-f1e8b0671196/img_1977.jpg","rotation":0,"imageHash":"DAgKBYAGqHZ3eHeDepZodwuKwbA4","imageWidth":5184,"imageHeight":3456,"__typename":"PrintImageType"}],"imagesCount":6,"tags":[{"name":"camera","id":"41","__typename":"TagType"},{"name":"landscape","id":"299","__typename":"TagType"},{"name":"mount","id":"469","__typename":"TagType"},{"name":"hiking","id":"973","__typename":"TagType"},{"name":"quick","id":"3084","__typename":"TagType"},{"name":"strap","id":"3276","__typename":"TagType"},{"name":"mirrorless","id":"3288","__typename":"TagType"},{"name":"backpack","id":"3618","__typename":"TagType"},{"name":"photography","id":"3632","__typename":"TagType"},{"name":"release","id":"3710","__typename":"TagType"},{"name":"dslr","id":"5232","__typename":"TagType"},{"name":"quickrelease","id":"8619","__typename":"TagType"},{"name":"backpacking","id":"11852","__typename":"TagType"},{"name":"dslm","id":"93397","__typename":"TagType"}],"thingiverseLink":null,"filesType":null,"previewFile":{"id":"1155332","filePreviewPath":"media/prints/238120/stls/2259153_40e5f1ba-8cce-4b72-b5be-1feddf28d2e6/camera-plate_preview.png","__typename":"STLType"},"license":{"id":"4","disallowRemixing":false,"__typename":"LicenseType"},"remixParents":[],"remixDescription":null,"easyprintProjects":[],"__typename":"PrintType","eligibleForNomination":false,"publishApprovalRequired":false,"publishRequests":[],"priceBeforeSale":null,"user":{"id":"78968","handle":"Project18_78968","verified":false,"dateVerified":null,"publicUsername":"Project18","avatarFilePath":"media/auth/avatars/6d/6d082c54-1ec0-4365-8e5a-532f293ae518.jpg","badgesProfileLevel":{"profileLevel":8,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isFollowedByMe":false,"isHiddenForMe":false,"canBeFollowed":true,"billingAccountType":"personal","lowestTierPrice":null,"designer":false,"stripeAccountActive":null,"membership":null},"contests":[{"id":"75","name":"Cameras And Accessories","slug":"cameras-and-accessories","description":"One of the hobbies that goes hand in hand with 3D printing and other maker-related skills, is photography. We all make fantastic things using our skills and it's only right to show them off. A great project deserves a good photo to show it off; a good photo can make a boring project seem incredible. Like many things though, a photography hobby can get expensive with all the gear one might want or need. Thankfully we have 3D printers and we can take some of that cost burden away.\r\n\r\nThis month, our extended competition is to create cameras and accessories.","isOpen":false,"__typename":"CompetitionType"}],"contestsResults":[],"prusameterPoints":null,"latestContestResult":null,"referencingArticles":[]}}}