Prusa-Meter
Do you want to know how much Prusament is REALLY left? Here is a mathematically accurate remaining Prusament indicator.
95
300
37
1319
updated July 7, 2022
Description
PDFTakes less than 20 minutes to print! Make sure to insert into the right hexagons!
Recommended settings:
- Material: PLA
- Supports: None
- Nozzle: 0.4 mm or less
- Layer height: 0.15 mm or less
- Infill: 50-100%
Features:
- Snaps in easily
- Does not obstruct spool rotation
- Quick to print with little material needed
- Convenient
- Reusable
- Size: ~58x24x4 mm
p.s. This gauge technically works to determine how much filament is left on any spool with a starting filament diameter D = 180 mm and ending D = 100 mm.
Tags
Model origin
The author marked this model as their own original creation.
