Crutches holder for wheel chair

Required for this model: 6 m3 nuts, 1 m3x8mm, 4 m3x20mm and 1 m3x12
Printed at .2mm quality on a mk3s+

You will have 2 clips once which is 25mm and one which is 22mm.

Put in each hexagonical hole a m3 nut then use the 25mm clip base (largest one) together with a m3X12mm bolt to mount the crutch cup.

Then use the 22mm clip base together with the m3x8mm bolt to mount the crutch clip.

Lastly use the remaining M3x20mm to fasten it to the wheelchair using the clip clamp