Portable DND Dice tower

I design an portable DND dice tower. Fold it open to reveal the trick track dice fall. I made it portable for easy travel. I does not contain storage for dice yet but I might make a V3 one day. 
Feel free to remix!

Most holes need to be treated by the bolts themselves. Connecting the top part to the bottom part requires 2x m3 nuts that need to be inserted in the designated holes. 

USED M3 Bolts. 
- (6x) M3x10 
- (2x) M3x16 (x20 works as well)  
- (10x) M3x25 (for the trick track part) 

NOTES:
- 2 of the M3x10 can be x12 or x16 too (these connect the sliders to the  Stop slider)
- make sure you don't screw the bolts for the top part to deep or it will treat through the part (yes you can cover this up with a sticker) 

Used settings on my Prusa Mini
- 0.25 layer height
- 15% infill for top, bottom, connectors (Cubic)
- 25% infill for slider and Stop Slider (Cubic)

Video: