Printable Compartment Organizer

I needed a compartment organizer and I had some old filament I needed to use up so I modeled one up. I have sized it so it can be printed on an Prusa MK2/MK3.

Takes about 6-8 hours for the lid and 18-22 hours for the base at 60mm/s with conservative accelerations.

If I remember correctly it used about 1/4 of a 1kg spool or 1/2lb of PLA.

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK3

Rafts:

No

Supports:

No

Resolution:

0.200mm

Infill:

10%