Print and fly this rocket with flags for fins.
5
5
0
209
updated July 4, 2022

Description

PDF

Print and fly this rocket with flags for fins. US Flag flown in the example. 

  • Print fins upside down with supports from build plate. 0.20 mm in PETG or PLA
  • Glue paper clip with small 90 degree bend into one of the two holes in engine and fin assembly to hold the engine in place after it fires. 
  • An STL file is included to print Launch lugs to launch rocket on 20x20 rail. You need to print two. Glue launch lugs on with super glue. 
  • If you want to launch on a rod like Estes makes you can glue on a straw.  
  • Print the pdf file with flags at 100% on your color printer, cut, and glue to the fins with glue stick.  More directions coming soon. 

People were asking for the STL files. I will upload more detailed instructions later. 

Recommended Engine: C6-3 or C6-5 
(cheapest place I have found to buy engines is Hobby Lobby - Way cheaper than online)

 

Estes Launch Pad and Launch: https://amzn.to/3yPBwkV
Estes Parachute: https://amzn.to/3unksQw

As an Amazon Associate I earn from qualifying purchases.
 

 

Tags



Model origin

The author hasn't provided the model origin yet.

License


Highlighted models from creator

View more