Upgraded Marble Dispenser and GameBox Organizer.
Need 2mm tall x 5mm diameter magnets for various attachments of hopper, base, and ramp.
Example of Magnets needed: https://www.amazon.com/gp/product/B08CN7J2S3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Need 5/16 diameter steel shaft for wheel (cut to 20mm) OR print comp cylinder for wheel with high infill.
Designed to be printed without supports. User should select print parameters based on experience. In general I started with 10-15% infill with “Support Cubic” for fill pattern (this shaved a few grams off the big files and some time as well). I used 3 perimeter walls for most files, but some could sneak by with 2.
Box Insert files can be glued with CA glue or if you have a large format printer, you can merge these files and have it in one go.
Art files are included, but not licensed by MFG. Size and use at your own risk. These were generally taken directly from game art (photos of the box art or materials).
Box Bottom Parts 1-3
Card Box and Lid - Player Tableau Go in Large Rectangle Above. VP box and Bowls go in the circular area with VP box on bottom with bowls nested above.
Hopper sits as pictured above. If desired some craft foam can take up the small space to keep it from shifting around too much.
Anchors fit into base part 3 and have tabs for rubber band to hold down the bowls and VP box.
This is generally how things will fit within the box. The Base and Hopper of the dispenser have a flat side and should be aligned with the outside of the box.
This is how the base module should look assembled. The logo billboard attaches and aligns with the light green key above the ramp.
The author marked this model as their own original creation.