Homematic - Temperature sensor

I have created a housing for my home-made temperature sensor.

I'm using the HMSensor PCBs from pa-pas Github: https://github.com/pa-pa/HMSensor

For the firmware, I have flashed the following one: https://github.com/jp112sdl/Beispiel\_AskSinPP/blob/master/examples/HM-WDS40-TH-I-SHT10/HM-WDS40-TH-I-SHT10.ino

For the screw I use four M3x22 countersunk head screws and m3 nuts

Edit (23.06.2018):
I have updated the STL files for better fit of the screws

Print instructions

Category: Electronics Print Settings

Printer Brand: Creality

Printer: CR-10

Rafts: No

Supports: Yes

Resolution: 0.2

Infill: 20

Notes:

Support is only used for the nut holes