Small tractor with freely rotating wheels and flexi excavator printed in just one piece. It is printed in the "on the side" position so no need to add supports. For a functional print, you need to have the first layer and flow properly calibrated (to prevent the wheels from sticking to the chassis). When removing from the backing, it is advisable to wait for the backing to cool and remove the print carefully due to possible breakage of small parts.
The model is available in two versions. Firstly, the classic one which has enough free moving parts to make the printout movable even in case of less than perfect printing. We have also added a version (bagr_0.25) with a smaller gap between the parts (0.25mm) and stops. Here, however, a well setup and accurate printer is indeed a prerequisite.
More toys printed in one piece:
Truck - tanker - https://www.printables.com/cs/model/255294
Little Bobcat - https://www.printables.com/cs/model/236978-little-bobcat-printed-in-one-piece-without-support
Small tractor - https://www.printables.com/cs/model/233171-small-tractor-tractor-spinner-printed-in-one-piece
RM-70 Vampire 4D - https://www.printables.com/cs/model/210683-small-truck-rm-70-vampire-4d-printed-in-one-piece
Flexi excavator - https://www.printables.com/cs/model/233416-small-tractor-flexi-excavator-printed-in-one-piece
Tatra 813 KOLOS - https://www.printables.com/cs/model/204992-small-truck-tatra-813-kolos-printed-in-one-piece
Small truck - https://www.printables.com/cs/model/203724-small-truck-printed-in-one-piece
Little beton mixer truck - https://www.printables.com/cs/model/86386-little-beton-mixer-truck-maly-domichavac
Small car - https://www.printables.com/cs/model/85918-small-car-male-auticko
Small van - https://www.printables.com/cs/model/85917-small-van-mala-dodavka
Uživatel se označil za původního autora tohoto modelu.