RAT RIG VCORE3 Spool holder

Super Speedy Spool Holder and filament guide for the RatRig V-core3.

It's mounted behind, above the electronics, the design does not interfere with the belt path.

Super simple design mounted to the frame with M6x12 cap head screws and M6 3030 inserts.

2 screws and inserts needed for the SpoolHolder and 2 for the filament guide.

The filament guide has tight tolerances and needs to be drilled after printing.

Use a 2mm drill for the hole that guides the filament and a 4mm drill for the hole that accommodates the teflon tube (wich is going to be pressed in).

Printed on Ender3 Pro in PETG:

0.2-0.3 layer height 

60 mm/s (everything except first layer)

80 mm/s infill

10% infill

15% part cooling fan

4 perimeters

4 top/bottom layers

Should take around 2,5 hours for both with 0.3 layer height.