Parametric toolkit coaster or anti-tipping.

It manages glasses, bottles, flasks and cans of any diameter and height, both circular and of other shapes.
31m
1× print file
0.30 mm
0.40 mm
2.00 g
In the contest Coasters
9
30
0
376
updated June 26, 2022

Description

PDF

//English + // Italian

// English

Parametric toolkit to generate any type of under cup or anti-tipping.

It manages glasses, bottles, flasks and cans of any diameter and height, both circular and of other shapes (eg square or hexagonal or other by operating on $fn.

There are endless different shapes to generate for virtually any object, , such as caps (we recommend TPU) for containers, we form a PRESET for Nutella-like containers.

We specifically printed coasters that actually serve more as anti-tip for cans or water bottles in our boat trips or supports to prevent our gym weights from falling on our feet as we store them on a bookcase.

We recommend carrying out a test on the exact diameter before printing the complete object using the test function provided in the model that cuts an upper slice of any height to check if the diameter is correct, or using the Slicer functions if present.

Several authors of models with OpenScad do not publish neither the .gcode nor the .STL files but only the .scad file.

The reason is that since OpenScad is a parametric tool it would be limiting to publish a .STL file among the infinitives that can be generated.

We have chosen to publish some .gcode and .STL files of some PRESETs we are testing.

To date we have tested and guarantee only the diameters for the 720DGREE bottle, for the other diameters of your glasses or your bottles you have to carry out tests,

To be absolutely consistent with the competition theme we have also printed a real flat coaster with top ironing.Salvare

This model can also be used by those who do NOT know OpenScad and have NO intention of learning it.

ADDENDUM after a few tests: 

With the proposed values, the 720 DGREE bottle enters with the right pressure and does not come out if turned upside down. Perhaps with the wider base it gains in stability but increases the bulk. You choose the right values for your needs.
For any of your requests, write to [email protected]

HOW TO OPERATE if YOU DON'T KNOW OpenScad

Download OpenScad: it is Open Source and multi-platform (Windows, Linux, MAC OS)

https://openscad.org/downloads.html

1) Load the OPenScad model you want to operate on

2) From the OpenScad Windows menu, disable the "Hide Customizer" checkbox to make the Customizer window appear on the right

3) In the Customizer window choose the values, opening the various boxes if present

4) Or start from our already supplied Presets, and then maybe modify them

5) Use Google Translate to translate the various boxes into your language

6) Even if you don't understand exactly what the various variables mean, try changing them anyway

7) Press F5 to view the result of the change

8) Continue to change the values ​​until you are satisfied (always F5 to see the result)

9) Finally, when you are satisfied, press F6 to render and then F7 to export the .STL file

10) To save your work, take note of the values ​​or add a PRESET (it will end up in the .json file)

11) Pass the .STL file to the Slicer and print!

How to save a PRESET

  • Press the + key
  • Choose a name
  • Save

 

// italiano

Toolkit parametrico per generare qualsiasi tipo di sotto bicchiere o anti-ribaltamento. 

Gestisce bicchieri, bottiglie, borracce e lattine di qualsiasi diametro e altezza, sia circolari sia di altre figure (esempio quadrata o esagonale o altro operando su $fn.

Ci sono infinite forme diverse da generare per praticamente qualsiasi oggetto, quali per esempio tappi (consigliamo il TPU) per contenitori, formiamo un PRESET per contenitori Nutella-like.

Noi nello specifico abbiamo stampato dei sottobicchieri che in realtà servono più come anti-ribaltamento per lattine o borracce nelle nostre uscite in barca o dei supporti per evitare che i nostri pesi da palestra ci cadano sui piedi visto che li conserviamo su una libreria.

Consigliamo di effettuare un test sul diametro esatto prima di stampare l’oggetto completo utilizzando la funzione di test prevista nel modello che taglia una fettina superiore di altezza a piacere per verificare se il diametro è corretto, o utilizzando le funzioni dello Slicer se presenti.

Diversi autori di modelli con OpenScad non pubblicano nè i file .gcode nè i file .STL ma soltanto il file .scad.

l motivo è che visto che OpenScad è un tool parametrico sarebbe limitante pubblicare un file .STL tra gli infiniti generabili.

Noi abbiamo scelto di pubblicare alcuni file .gcode e .STL di alcuni PRESET che stiamo testando.

Alla data attuale abbiamo provato e garantiamo solo i diametri per la borraccia 720DGREE, per gli altri diametri dei vostri bicchieri o delle vostre bottiglie dovete effettuare dei test.

Per essere assolutamente conformi al tema del concorso abbiamo anche stampato un vero e proprio sottobicchiere piatto con la stiratura superiore.

 

Questo modello può essere usata anche da chi NON conosce OpenScad e non ha NESSUNA intenzione di impararlo.

 

COME OPERARE se NON CONOSCETE OpenScad

Scaricate OpenScad: è Open Source e multi piattaforma (Windows,Linux, MAC OS)

https://openscad.org/downloads.html

  1. Caricate il modello OPenScad su cui volete operare
  2. Dal menu Windows di OpenScad disattivare il chech "Nascondi Customizer" per fare apparire a destra la finestra del Customizer
  3. Nella finestra del Customizer scegliere i valori, aprendo i vari box se presenti
  4. Oppure partite dai nostri Preset già forniti, per poi magari modificarli
  5. Usate Google Translate per tradurre i vari box nella vostra lingua
  6. Anche se non capite esattamente cosa indicano le varie variabili provate lo stesso a cambiarle
  7. Premete F5 per visualizzare il risultato della modifica
  8. Continuate a cambiare i valori finché non siete soddisfatti (sempre F5 per vedere l’esito)
  9. Alla fine, quando siete soddisfatti, premete F6 per eseguire il rendering e quindi F7 per esportare il file .STL
  10. Per salvare il lavoro fatto prendete nota dei valori o aggiungete un PRESET (finirà nel file .json)
  11. Passate il file .STL allo Slicer e stampate!

Come salvare un PRESET

  • Premere sul tasto +   
  • Scegliere un nome
  • Salvate

ADDENDUM dopo qualche test: 

Con i valori proposti la borraccia 720 DGREE ci entra con la giusta pressione e non esce se capovolta. Forse con la base più larga ci guadagna in stabilità ma aumenta l'ingombro. Scegliete voi i valori adeguati alle vostre esigenze.
Per qualsiasi vostra richiesta scrivete a [email protected] 

Tags



Model origin

The author hasn't provided the model origin yet.

License