{"data":{"model":{"id":"231288","slug":"gen2-modular-drawers-standard","name":"GEN2 Modular Drawers - Standard","authorship":"author","club":false,"excludeCommercialUsage":false,"price":null,"eduProject":null,"ratingAvg":"4.9673202614","myRating":null,"ratingCount":153,"description":"

A new generation of the popular Lack Enclosure Drawers. The Gen2 Lack Enclosure Drawers are part of the GEN2 Modular Storage System I designed which features a simplified installation method that allows you to rearrange and customize layouts in minutes.

Originally designed for the \u201cOriginal Prusa i3 MK3 ENCLOSURE\u2026\", The Lack drawers have found their way on to many desks, workbenches, and other tables as well. Now with the Gen2's rail design you can quickly swap the storage units between work areas.

New for 2024: GEN2 Decor Series

New for 2024
	Customize drawers for any room The GEN2 Decor Drawers are an optional alternative to the drawers available in this kit. Check it out HERE

Introducing GEN2 QuickLock!

Features:
\u2022 Gen2 rails allowing quick and easier swap-ability and combinations of many Gen2 Storage System designs.
\u2022 Lack Drawers also include optional slots for magnets allowing drawers to snap into place with a nice \"Click\".
\u2022 Drawer stoppers keep your drawers from attacking your feet.
\u2022 Designed for larger and easier to install wood screws over the original lack enclosure drawer design.

HARDWARE
\u2022 Screwdriver
\u2022 Countersunk woodscrews: (Metric: 4x25mm to 4x16mm) or (SAE: #6 or #8 up to 1\" long)
\u2022 Drill bit that is smaller diameter than the wood screws
\u2022 Pen, Marker, or Scratch Awl
\u2022 Magnets (Optional): 10x5x2mm or 10x2mm
\u2022 M3 nuts
\u2022 M3 Screws M3x6 - M3x10

INSTRUCTIONS

\u2022 With a marker or pen use the GEN2-QL rail to mark the hole locations on the surface you are mounting.

\u2022 Drill out marked locations using a drill bit smaller than the diameter of the wood screw you will be using.

\u2022 Prep the rail for installation by installing M3 nuts into the hexagonal holes. You can use a M3 screw to position and tighten the nut in place.

\u2022 Install the rail using wood screws, use at least 4 screws on the outer corners to mount the single rail and and 6 to mount the double rail. (extra screw holes are available if you plan to stack more than 2 rows of drawers or contents of heavier than normal weight.)

\u2022 Prep the drawer case for installation:

\u2022 Install GEN2-QL (QuickLock Mechanisms) These will allow you to quickly lock and unlock drawers without the need to screw them in place with a rail lock.

- Install optional magnets if desired
NOTE: you only need to install at least one magnet, you can choose to install 2 stacked if you want more magnetism between the case and the drawer. Pay attention to polarity, they can be corrected later if needed.

- Install optional nuts in drawer case (these are only used if you are installing a shorter drawer beneath this drawer case.

- Install optional drawer stops by pressing them into place as they are friction fit. Pay attention to the orientation, notch facing down and towards the front to pass through the slot. The one labeled \u201cL\u201d goes on the left side of the case and \u201cR\u201d on the right side. (While facing the front of the case)

OPTIONAL - Alternative method for locking drawers (You do not need this if you are using GEN-QL QuickLock Mechanisms)

\u2022 Slide the case into position until it either stops or lines up with the front of the rail. (If you feel any resistance you might need to clean up and plastic imperfections around the male or female rails.

\u2022 Slide a rail lock into the rail found on the backside of the drawer case, slide all the way to the top until it buts up against the hole in the rail that contains the nut. Screw in place using a M3x8 or M3x10.

\u2022 Prep the drawer, install the optional magnet, pay attention to the polarity. (If you need to remove the magnet you can use another magnet to pull it out of place or use a small Allen wrench or paper clip inserted into the hole below it.)

\u2022 Insert the drawer by tilting in back when installing in order to pass by the drawer stopper notches. The drawer should now slide into place.

\u2022 I guess you're all done unless you want to make more drawers :)

Installing Drawers under each other

\u2022 This is the same process as above but instead of mounting the \"Rail Lock\" into the nut on the rail you will need to slide a \u201cRail Lock Upper\u201d into place on the back of the case above or if installing a shorter drawer line up with the hole in the case above it.
NOTE: You can only install the same length or smaller drawer case under each drawer case.

GEN2 Labels

\u2022 Open the file for the GEN2 Label in PrusaSlicer 2.7 or newer. This file is already setup to have it's text changed, simply right click on the \u201cText\u201d object on the panel to the right and select \u201cEdit Text\u201d

\u2022 Here you can select your font of choice, I recommend a condensed font, for example I use \u201cGotham Condensed\u201d on most of my models, but you if you don't have that there are many great alternatives already on your computer. Note that fonts too thin or thick may not print legibly at small sizes. I may do some more testing to give more recommendations on fonts and text height, or even feedback from users such as yourself.

\u2022 There is a color change programmed for the text, in this case my printer swapped colors for the last layer. If you are not familiar with this process the printer will automatically stop printing and eject the current filament for another, for example I swapped out the Orange filament for Black

\u2022 If your printer supports automatic color changing such as the MMU2/3 or Bambu AMS, the color change can be programmed to happen automatically.

TROUBLSHOOTING

Triple and Quad Drawer cases flexing with drawers under them

These wider drawers lack support in the middle and work best as the lowest placed drawers in your layout.

Corners lifting off bed

\u2022 This is often caused by poor bed or not having a warm enough enclosure, the cause is from high layers shrinking as they cool creating tension on the layers below, pulling the corners up. A great way to combat this on any print with sharp corners is to add \u201cMouse Ears\u201d.

\u2022 Add these in PrusaSlicer by right clicking on the model in the list on the right of the screen, hover over \u201cAdd Part\u201d and select \u201cAdd Cylinder\u201d

\u2022 With the cylinder selected, in the \u201cPart manipulation\u201d menu in the bottom right, uncheck the lock next to size, set the \u201cx\u201d and \u201cy\u201d value to 10mm and \u201cz\u201d to 0.25mm. If the cylinder is floating above the print bed you will need to select \u201cDrop to bed\u201d in this menu as well.

Place and copy these cylinders in any corner of your print to mitigate lifting off the bed.

RECOMMENDED PRINT SETTINGS

Filament: PLA (PETG or ABS for heavier duty storage)
Nozzle Size: 0.4mm
Print Height: 0.2-0.35mm
Infill: 10-20%

NOTE: The new cases in this design are backwards compatible with drawers from the original Lack Enclosure Drawers design

","category":{"id":"2","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","description":"Upgrading and improving your 3D printer couldn't be easier - no matter whether you're looking for functional or aesthetic modifications. Discover the best improvements.","__typename":"CategoryType"},{"id":"2","name":"Other Printer Parts & Upgrades","nameEn":"Other Printer Parts & Upgrades","description":"Customize your 3D printer with hundreds of enhancements! Download spool holders, camera mounts, LCD covers, fan shrouds and even the Lack enclosure!","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-01-18T03:08:41.952140+00:00","firstPublish":"2022-06-30T03:35:33.310803+00:00","datePublished":"2025-01-18T03:08:41.901291+00:00","dateCreatedThingiverse":null,"nsfw":false,"summary":"A new generation of the popular Lack Enclosure Drawers. Modular design allows for easy installation and customization.","likesCount":3967,"makesCount":173,"liked":null,"printDuration":"0.00","numPieces":0,"weight":"0.00","nozzleDiameters":[],"usedMaterial":null,"layerHeights":[],"mmu":false,"materials":[],"dateFeatured":null,"downloadCount":10514,"displayCount":51669,"filesCount":41,"privateCollectionsCount":3141,"publicCollectionsCount":2503,"pdfFilePath":"media/prints/231288/pdfs/231288-gen2-modular-drawers-standard-066fdfa1-d023-48e2-b7b2-64ae776fceec.pdf","commentCount":240,"userGcodeCount":0,"remixCount":17,"canBeRated":false,"printer":{"id":"1","name":"Prusa MK3/S/S+","__typename":"PrinterTypeType"},"image":{"id":"2915115","filePath":"media/prints/231288/images/6251913_3d8a4cfe-2384-46be-8f35-a1159943e38a_c564bee7-81c6-4cbb-8f13-6970d926967a/gen2-ql-drawers-standard.png","rotation":0,"imageHash":"nBgGJYaOVJrwSXc55Zd2hA6KxIBo","imageWidth":2000,"imageHeight":1500,"__typename":"PrintImageType"},"images":[{"id":"2915115","filePath":"media/prints/231288/images/6251913_3d8a4cfe-2384-46be-8f35-a1159943e38a_c564bee7-81c6-4cbb-8f13-6970d926967a/gen2-ql-drawers-standard.png","rotation":0,"imageHash":"nBgGJYaOVJrwSXc55Zd2hA6KxIBo","imageWidth":2000,"imageHeight":1500,"__typename":"PrintImageType"},{"id":"1043731","filePath":"media/prints/231288/images/2129946_a3621822-3ef8-460f-861e-321ab8fd8d36/thumbnail-gen2-lack-enclosure-drawers.png","rotation":0,"imageHash":"3cYFJYbWnZdxpniOSZakf1t9sPYG","imageWidth":1711,"imageHeight":1139,"__typename":"PrintImageType"},{"id":"1040715","filePath":"media/prints/231288/images/2123464_321e1bc9-2d8e-460e-9226-5057c51727a7/screenshot-2022-06-29-234528.png","rotation":0,"imageHash":"1ygKHIRJPHYgiKmlR7sIUpEwNQ==","imageWidth":2488,"imageHeight":1399,"__typename":"PrintImageType"},{"id":"1041504","filePath":"media/prints/231288/images/2125068_9a5ff1a8-6249-4a1d-8489-55498cfb182a/screenshot_20220630-121335.png","rotation":0,"imageHash":"jygKG4YLE0h6ZmaYC6yywDo=","imageWidth":2340,"imageHeight":1080,"__typename":"PrintImageType"},{"id":"1041507","filePath":"media/prints/231288/images/2125066_c41deaff-162b-458f-825c-3f062da3cb65/screenshot_20220630-121535.png","rotation":0,"imageHash":"HggSE4JHCDZ5hqhnlIlfLf0=","imageWidth":2340,"imageHeight":1080,"__typename":"PrintImageType"},{"id":"1269777","filePath":"media/prints/231288/images/2594796_813c88f0-c57c-48df-9041-bf7d82ed790a/dsc0033.jpg","rotation":0,"imageHash":"DnkKJY5Qp5WIeIeEeWiIhwVnZXBV","imageWidth":4928,"imageHeight":3264,"__typename":"PrintImageType"},{"id":"2618348","filePath":"media/prints/231288/images/5585301_b1a4bbc1-97bd-4f98-8e38-3046e7a1bb7b_eb528df6-894a-48a6-83e4-2be73b91ef9f/gen2-lack-drawers-v33-thumbnail.png","rotation":0,"imageHash":"3PcJPYqfiIpYpWV5qGmIpwdIZZBk","imageWidth":1500,"imageHeight":1000,"__typename":"PrintImageType"}],"tags":[{"name":"table","id":"16","__typename":"TagType"},{"name":"box","id":"65","__typename":"TagType"},{"name":"organizer","id":"66","__typename":"TagType"},{"name":"tool","id":"83","__typename":"TagType"},{"name":"ikea","id":"99","__typename":"TagType"},{"name":"wrench","id":"108","__typename":"TagType"},{"name":"mk3","id":"133","__typename":"TagType"},{"name":"holder","id":"165","__typename":"TagType"},{"name":"desk","id":"208","__typename":"TagType"},{"name":"container","id":"235","__typename":"TagType"},{"name":"mount","id":"469","__typename":"TagType"},{"name":"modular","id":"628","__typename":"TagType"},{"name":"enclosure","id":"850","__typename":"TagType"},{"name":"stackable","id":"1089","__typename":"TagType"},{"name":"storage","id":"1916","__typename":"TagType"},{"name":"customizable","id":"1978","__typename":"TagType"},{"name":"ender","id":"2006","__typename":"TagType"},{"name":"storagebox","id":"2017","__typename":"TagType"},{"name":"lack","id":"2087","__typename":"TagType"},{"name":"tray","id":"2348","__typename":"TagType"},{"name":"magnetic","id":"2500","__typename":"TagType"},{"name":"bin","id":"2890","__typename":"TagType"},{"name":"cabinet","id":"2922","__typename":"TagType"},{"name":"toolholder","id":"3121","__typename":"TagType"},{"name":"slide","id":"3284","__typename":"TagType"},{"name":"screwdriver","id":"3349","__typename":"TagType"},{"name":"rail","id":"3375","__typename":"TagType"},{"name":"bench","id":"3642","__typename":"TagType"},{"name":"portable","id":"3743","__typename":"TagType"},{"name":"caddy","id":"4001","__typename":"TagType"},{"name":"drawer","id":"4909","__typename":"TagType"},{"name":"workbench","id":"4984","__typename":"TagType"},{"name":"wide","id":"5007","__typename":"TagType"},{"name":"double","id":"5218","__typename":"TagType"},{"name":"under","id":"5650","__typename":"TagType"},{"name":"insert","id":"5662","__typename":"TagType"},{"name":"stack","id":"5960","__typename":"TagType"},{"name":"chamber","id":"7202","__typename":"TagType"},{"name":"canister","id":"13334","__typename":"TagType"},{"name":"gen2","id":"20302","__typename":"TagType"},{"name":"interchangeable","id":"28404","__typename":"TagType"},{"name":"underdesk","id":"28722","__typename":"TagType"},{"name":"removable","id":"30675","__typename":"TagType"},{"name":"bambu","id":"56805","__typename":"TagType"},{"name":"configure","id":"93801","__typename":"TagType"},{"name":"bambulab","id":"95940","__typename":"TagType"},{"name":"bambulabx1carbon","id":"95942","__typename":"TagType"},{"name":"x1c","id":"98541","__typename":"TagType"},{"name":"p1p","id":"115465","__typename":"TagType"},{"name":"p1s","id":"159177","__typename":"TagType"}],"thingiverseLink":null,"filesType":null,"previewFile":{"id":"989638","filePreviewPath":"media/prints/231288/stls/2129633_ff94254a-0aae-4f7c-9a18-46f1c05f4fb0/gen-2-test-print-parts_preview.png","__typename":"STLType"},"license":{"id":"1","disallowRemixing":false,"__typename":"LicenseType"},"remixParents":[],"remixDescription":null,"__typename":"PrintType","user":{"id":"5751","handle":"Jerrari","verified":false,"dateVerified":null,"publicUsername":"Jerrari","avatarFilePath":"media/auth/avatars/7d/7d2e703b-a1a4-461e-a0ca-fd4089c9525c.png","badgesProfileLevel":{"profileLevel":36,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isFollowedByMe":false,"canBeFollowed":true,"billingAccountType":"personal","lowestTierPrice":"3.00","highlightedModels":{"models":[{"id":"1118906","name":"GEN2 Table Top Kit V2 - STANDARD","slug":"gen2-table-top-kit-v2-standard","ratingAvg":"5.0000000000","likesCount":1585,"liked":null,"datePublished":"2025-01-04T16:48:36.860242+00:00","dateFeatured":null,"firstPublish":"2024-12-23T21:06:56.518280+00:00","downloadCount":2344,"mmu":false,"category":{"id":"50","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"50","name":"Organizers","nameEn":"Organizers","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-01-04T16:48:36.891971+00:00","image":{"id":"3895343","filePath":"media/prints/1118906/images/8451297_816cf0f3-e769-442e-97ab-5051385642f2_9bd7ee88-1347-4d5e-9439-ede31e99689a/gen2-table-top-kit-v2-standard.png","rotation":0,"imageHash":"1mkKJYgrZ3Zghnd2eJencwiWckA4","imageWidth":2000,"imageHeight":1500,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"5751","handle":"Jerrari","verified":false,"dateVerified":null,"publicUsername":"Jerrari","avatarFilePath":"media/auth/avatars/7d/7d2e703b-a1a4-461e-a0ca-fd4089c9525c.png","badgesProfileLevel":{"profileLevel":36,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"231288","name":"GEN2 Modular Drawers - Standard","slug":"gen2-modular-drawers-standard","ratingAvg":"4.9673202614","likesCount":3967,"liked":null,"datePublished":"2025-01-18T03:08:41.901291+00:00","dateFeatured":null,"firstPublish":"2022-06-30T03:35:33.310803+00:00","downloadCount":10514,"mmu":false,"category":{"id":"2","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"2","name":"Other Printer Parts & Upgrades","nameEn":"Other Printer Parts & Upgrades","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-01-18T03:08:41.952140+00:00","image":{"id":"2915115","filePath":"media/prints/231288/images/6251913_3d8a4cfe-2384-46be-8f35-a1159943e38a_c564bee7-81c6-4cbb-8f13-6970d926967a/gen2-ql-drawers-standard.png","rotation":0,"imageHash":"nBgGJYaOVJrwSXc55Zd2hA6KxIBo","imageWidth":2000,"imageHeight":1500,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"5751","handle":"Jerrari","verified":false,"dateVerified":null,"publicUsername":"Jerrari","avatarFilePath":"media/auth/avatars/7d/7d2e703b-a1a4-461e-a0ca-fd4089c9525c.png","badgesProfileLevel":{"profileLevel":36,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"1093933","name":"GEN2 Decor - Faceplates - EdgeLabel Series","slug":"gen2-decor-faceplates-edgelabel-series","ratingAvg":"5.0000000000","likesCount":164,"liked":null,"datePublished":"2025-01-21T04:39:54.446896+00:00","dateFeatured":null,"firstPublish":"2024-12-01T22:36:26.730270+00:00","downloadCount":null,"mmu":false,"category":{"id":"50","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"50","name":"Organizers","nameEn":"Organizers","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-01-21T04:39:54.492335+00:00","image":{"id":"3816274","filePath":"media/prints/1093933/images/8271569_a345dd38-f2ee-42f6-a0d2-9cb5da8b873e_bbe456d9-dba8-4094-95a1-84793d6f1fc7/gen2-decor-drawers-faceplate-edgelabel-series.png","rotation":0,"imageHash":"0jgKFYQoenVglnl4iHepdQFTQFEG","imageWidth":2000,"imageHeight":1500,"__typename":"PrintImageType"},"nsfw":false,"club":true,"price":"5.00","user":{"id":"5751","handle":"Jerrari","verified":false,"dateVerified":null,"publicUsername":"Jerrari","avatarFilePath":"media/auth/avatars/7d/7d2e703b-a1a4-461e-a0ca-fd4089c9525c.png","badgesProfileLevel":{"profileLevel":36,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"1080232","name":"RETRO GameStack - NES","slug":"retro-gamestack-nes","ratingAvg":"0E-10","likesCount":46,"liked":null,"datePublished":"2024-12-15T03:40:23.524883+00:00","dateFeatured":null,"firstPublish":"2024-11-20T03:02:14.028845+00:00","downloadCount":null,"mmu":false,"category":{"id":"100","path":[{"id":"21","name":"Gadgets","nameEn":"Gadgets","__typename":"CategoryType"},{"id":"100","name":"Video Games","nameEn":"Video Games","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-12-15T03:40:23.565241+00:00","image":{"id":"3775528","filePath":"media/prints/1080232/images/8168181_85761e84-8ece-4387-b41e-9ddbf1b491f8_07e3c565-46f2-43a1-b083-4776d6b13a15/retro-gamestack-heroshot.jpg","rotation":0,"imageHash":"kBgGFYQdMpd0ZYdiirmoYLpguwmI","imageWidth":5064,"imageHeight":3798,"__typename":"PrintImageType"},"nsfw":false,"club":true,"price":"5.00","user":{"id":"5751","handle":"Jerrari","verified":false,"dateVerified":null,"publicUsername":"Jerrari","avatarFilePath":"media/auth/avatars/7d/7d2e703b-a1a4-461e-a0ca-fd4089c9525c.png","badgesProfileLevel":{"profileLevel":36,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"370632","name":"EV Charger Holder J1772","slug":"ev-charger-holder-j1772","ratingAvg":"4.8857142857","likesCount":285,"liked":null,"datePublished":"2024-11-02T00:45:48.171631+00:00","dateFeatured":null,"firstPublish":"2023-01-16T02:20:21.677544+00:00","downloadCount":1431,"mmu":false,"category":{"id":"89","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"89","name":"Automotive","nameEn":"Automotive","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-11-02T00:45:48.193489+00:00","image":{"id":"2437556","filePath":"media/prints/370632/images/5167148_72128cfd-814c-425c-8a67-edc4bb8cbe06_fc1914ab-0479-4284-a020-3cc456edc197/ev-charger-holder-j1772-b.png","rotation":0,"imageHash":"qygGFYTO8DxVxllO1rWMn0BqAKQG","imageWidth":1500,"imageHeight":1000,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"5751","handle":"Jerrari","verified":false,"dateVerified":null,"publicUsername":"Jerrari","avatarFilePath":"media/auth/avatars/7d/7d2e703b-a1a4-461e-a0ca-fd4089c9525c.png","badgesProfileLevel":{"profileLevel":36,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"964551","name":"GEN2 Decor Drawers - Standard","slug":"gen2-decor-drawers-standard","ratingAvg":"5.0000000000","likesCount":189,"liked":null,"datePublished":"2025-01-23T03:38:03.233088+00:00","dateFeatured":null,"firstPublish":"2024-08-10T00:19:49.603281+00:00","downloadCount":665,"mmu":false,"category":{"id":"50","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"50","name":"Organizers","nameEn":"Organizers","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-01-23T03:38:03.274306+00:00","image":{"id":"3426696","filePath":"media/prints/964551/images/7391616_cb90589f-b085-4cb5-988d-c1aa18ad79e6_f73a95f5-546c-480f-8b82-eeb1a669fc63/gen2-decor-drawers-standard.png","rotation":0,"imageHash":"2ygGDYQ6WxoS5phhgwh5eWmAiQeY","imageWidth":2000,"imageHeight":1500,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"5751","handle":"Jerrari","verified":false,"dateVerified":null,"publicUsername":"Jerrari","avatarFilePath":"media/auth/avatars/7d/7d2e703b-a1a4-461e-a0ca-fd4089c9525c.png","badgesProfileLevel":{"profileLevel":36,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"911025","name":"GEN2 Tilt Drawer Pro - MEDIUM","slug":"gen2-tilt-drawer-pro-medium","ratingAvg":"5.0000000000","likesCount":142,"liked":null,"datePublished":"2025-01-13T04:44:43.099232+00:00","dateFeatured":null,"firstPublish":"2024-06-14T02:05:52.540271+00:00","downloadCount":null,"mmu":false,"category":{"id":"50","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"50","name":"Organizers","nameEn":"Organizers","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-01-13T04:44:43.127639+00:00","image":{"id":"3979339","filePath":"media/prints/911025/images/8655669_03e1fc92-b4a9-4fae-a888-b0e94bae9222_edb171af-d556-4c45-a847-af0b8106e36b/gen2-ql-tilt-drawers-medium-thumbnail-b.png","rotation":0,"imageHash":"oucFLYa6sGl5a5mbhrdmaAt2tlBn","imageWidth":2000,"imageHeight":1500,"__typename":"PrintImageType"},"nsfw":false,"club":true,"price":"5.00","user":{"id":"5751","handle":"Jerrari","verified":false,"dateVerified":null,"publicUsername":"Jerrari","avatarFilePath":"media/auth/avatars/7d/7d2e703b-a1a4-461e-a0ca-fd4089c9525c.png","badgesProfileLevel":{"profileLevel":36,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"116526","name":"Tool Holders - Ryobi","slug":"tool-holders-ryobi","ratingAvg":"4.8780487805","likesCount":2292,"liked":null,"datePublished":"2024-11-02T00:47:14.083206+00:00","dateFeatured":null,"firstPublish":"2022-01-10T03:47:47.856855+00:00","downloadCount":8304,"mmu":false,"category":{"id":"49","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"49","name":"Tools","nameEn":"Tools","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-11-02T00:47:14.108215+00:00","image":{"id":"589276","filePath":"media/prints/116526/images/1138312_da3d7df0-4c65-4fc1-84f5-02f7851d7522/ryobi-tool-holder-v2.png","rotation":0,"imageHash":"WMcFLYrGiJUldJePluiKl0ePdvZo","imageWidth":4032,"imageHeight":3024,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"5751","handle":"Jerrari","verified":false,"dateVerified":null,"publicUsername":"Jerrari","avatarFilePath":"media/auth/avatars/7d/7d2e703b-a1a4-461e-a0ca-fd4089c9525c.png","badgesProfileLevel":{"profileLevel":36,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"}],"featured":true,"__typename":"HighlightedModelsType"},"designer":true,"stripeAccountActive":true,"membership":{"id":"0-5751","currentTier":null,"__typename":"UserMembershipType"}},"contests":[],"contestsResults":[],"prusameterPoints":null,"latestContestResult":null}}}

UPDATES
	01/07/2024 \u2022 Added Triple and Quad drawers (standard length) \u2022 Updated all drawer cases to V3.3, these are updated for reduced drawer friction, warping, and material \u2022 Drawer Labels! Each drawer has a version with a label insert available. With PrusaSlicer 2.7.1+ you can easily change the text to anything your heart desires
	10/11/2023 Tool insert holders designed to fit some of the most 3D printer tools and accessories GEN2 Tool Organizer Inserts By Mr.President Download HERE
	10/2/2023 The 1st of my tool inserts have been added. The first version fits the Tools received with Prusa MK4 Printers. I have more in the works for the rest of the Prusa Line up. Tool Organizer Drawer inserts - MK4 Download HERE

GEN2 COMPATIBLE PRINTS
GEN2 Hex Bit Inserts Download HERE
Gen2 Adjustable Steel Sheet Holder Download HERE
Gen2 Open Bin Lack Drawers Download HERE
Gen2 Gridfinity Drawers Download HERE
Gen2 Parts Drawers Download HERE
GEN2 Steel Sheet Holder V2 for Lack Enclosures Download HERE
Gen2 Slim Lack Enclosure Drawers Download HERE
Gen2 Modular Lack Enclosure Drawers Download HERE
Gen2 Modular Tilt Drawers Download HERE
Gen2 Large Modular Tilt Drawers Download HERE
Gen2 Large Enclosure Bins Download HERE

Customize drawers for any room

Check it out HERE

Introducing GEN2 QuickLock!

GEN2 Tool Organizer InsertsBy Mr.PresidentDownload HERE

Tool Organizer Drawer inserts - MK4Download HERE

OPTIONAL - Alternative method for locking drawers (You do not need this if you are using GEN-QL QuickLock Mechanisms)

Installing Drawers under each other

RECOMMENDED PRINT SETTINGS

GEN2 COMPATIBLE PRINTS

GEN2 Hex Bit Inserts

Gen2 Adjustable Steel Sheet Holder

Gen2 Open Bin Lack Drawers

Gen2 Gridfinity Drawers

Gen2 Parts Drawers

GEN2 Steel Sheet Holder V2 for Lack Enclosures

Gen2 Slim Lack Enclosure Drawers

Gen2 Modular Lack Enclosure Drawers

Gen2 Modular Tilt Drawers

Gen2 Large Modular Tilt Drawers

Gen2 Large Enclosure Bins

GEN2 Tool Organizer Inserts
By Mr.President
Download HERE

Tool Organizer Drawer inserts - MK4
Download HERE