Refrigerator compartment and latch / Flaschenfach und Türgriff für Kühlschrank

As replacement parts/ Als Ersatzteile
7
21
0
302
updated June 24, 2022

Description

PDF

My partens fixed their fridge MacGyver style. Twice. Was nice. But it broke again and they asked me if I could 3d print a door compartment  for bottles and a latch to keep the build in freezer closed. I don't know, but I think this fridge is an old AEG refridgerator (about 20 years old) . Correct me if i wrong. Made some screenshots of the dimensions.

Latch needs 1x M3 melt in threded insert and 1x M3x10mm or M3x12mm screw.

Printed in PETG, 0.4mm nozzle, 0.2mm layerheight, 4 perimeters, 15% infill, no supports exept for latch. About ~450g filament and ~33 hours printtime in total.

 

Meine Eltern haben ihren alten Kühlschrank auf die MacGyver Art repariert. Zweimal. Hielt gut, bis jetzt. Wurde gefragt ob ich das Flaschenfach der Kühlschranktür und den Türgriff für das interne Tiefkühlfach durch 3d gedruckte Teile ersetzen könnte. Welches Modell oder gar eine Serinernummer ist mir nicht bekannt, aber ich glaube es ist ein alter AEG Kühlschrank (circa 20 jahre alt). Bitte berichtigt mich falls ich falsch liege. Habe ein paar Bilder von den Maßen hinzugefügt.

Der Türgriff fürs Eisfach benötigt 1x M3 Gewindeeinsatz und 1x M3x10mm oder M3x12mm Schraube.

Gedruckt in PETG, 0.4mm Düse, 0.2mm Schichthöhe, 4 Perimeter, 15% Füllung, keine Stützen ausser für den Türgriff. Etwa 450g Filament und ~33 Stunden Druckzeit insgesamt.

Tags



Model origin

The author hasn't provided the model origin yet.

License


Highlighted models from creator

View more