Veteran Sherman EUC Stand - Roll in

Roll in stand for Veteran Sherman EUC
15
139
1
907
updated June 23, 2022

Description

PDF

Remix of this thingiverse model
The original would fall over sideways unless the wheel was perfectly aligned. I gave it a wider base and changed the bolt holes to all be M4x30mm, shorter bolts will also work.

Print the sides with the inside face (largest flat side) down on the bed with a brim to prevent warping.

I used a 0.8mm nozzle, 0.5mm layer height, 0.96mm line width, 3 perimeters, and 50mm/s.

Tags



Model origin

The author hasn't provided the model origin yet.

License