Small Project enclosure 63mm x 75mm x 47mm inside measurements.

Small Enclosure for your projects. I print them in PETG at 0.28mm height for speed.
4
25
0
237
updated June 23, 2022

Description

PDF

I created this little enclosure for some projects i have. You can print the seal out of TPU which seems to work well.

You need to add in m3 nut inserts as per second picture. 

You can break off the centre part if you do not want the seperation. I normally use the small area for some 220Vac to 5V psu etc.

Tags



Model origin

The author hasn't provided the model origin yet.

License