Sun, Moon, & Star Coasters

Bring the sky to your table with these amazing coasters! There are four main designs, each with a detailed and a simple version. There is also an inverted version of each of those, which means if you were to slice design and its inverse with the same color changes, the colors would be in different places (see photos for reference.) In total there are 16 coasters, so you have plenty of options.

Please post your makes, and happy printing!

Print Settings

• Layer Height – 0.2mm
• Material – PETG, PLA, or other
• Infill — 15% Honeycomb
• Perimeters – 2
• Top Fill Pattern – Octagram Spiral
• Bottom Fill Pattern – Octagram Spiral
• Detect Thin Walls – Optional – Some of the coaster designs may benefit with this setting on, please observe the difference within your slicer preview.
• Ironing – Optional – 20% at 0.09mm spacing. (If you want your coasters to look cleaner and crisper)

Colors & Layers

• Layer Height 0.0-2.6 — Color 1
• Layer Height 2.8-3.0 — Color 2
• Layer Height 3.2-5.0 — Color 3 (if you want the rim to be a different color)