Bender Arduino Humanoid robot

Funny Robot Bender a combination of the Open Source Otto with arms 

Bill of materials (BOM)

• 6 x SG90 or MG90s SERVOS
• 1 x Arduino NANO atmega328 version
• 1 x Arduino NANO I/O shield
• 1 x HC SR04 ultrasonic module
• 1 x piezo 5volt buzzer
• 12 x Female to female hook-up wires
• 1 x Bluetooth module (optional)
• LIPO battery 3.7volt and a suitable DC-DC converter module (optional)
• 3D printed parts from files folder

Machines & Software

Recommended to use a FDM 3D printer with PLA material.

20% infill

supports for the feet Only as they need to printed as they are provided

I use a RAFT to help stick to the bed, this is optional

There should be no need to rotate any parts, print as they are shown.

We invested lots of time and resources to provide open source code, software and hardware, please support this project by just giving us a ❤ Like and share and you are welcome to be a part of this friendly community of robot builders, teachers and makers. Join today our Otto Builder community