I based my design off of LarnOm ender 3 bed handle as it's worked well for my Ender 3 Pro's. This handle is made for…
12
98
2
569
updated June 22, 2022

Description

PDF

I based my design off of LarnOm ender 3 bed handle as it's worked well for my Ender 3 Pro's. This handle is made for the Artillery Sidewinder X1 which is wider and has a bit of different spacing requirements. First file is the logo curved version, 2nd file is a flat variant with no logos, 3rd file is the no logo curved version and the 4th is flat with both the artillery lettering and the X icon. Both flat versions are designed with a center hole to mount a camera. Printed at .2 with 50% infill for stability. you could possibly use 30% and be just as good.

Print Settings

Printer:

Artillery Sidewinder X1

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

.2

Infill:

30-50%


Notes:

You can print it flat if desired but it will be a bit weaker & you still need some support under the curves on any of these files. best method is to print 90 degrees from the flat with full supports for strength

Category: 3D Printer Parts

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License