USB Plug Type A casing Ummantelung Stecker

I have printed it at 0.04mm and 0.2mm layer height and both look great.

I have designed this casing because I soldered the usb plug from an old usb cable to my broken usb type-c cable and needed an enclosure.

I have added a step-file so you can modify it with a 3d-modeling software.

The step-file contains both halves but the stl-file just one half.

To print both halves at once, just multiply it in your slicer or open the file twice.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Supports:

Yes

Resolution:

doesn't matter

Infill:

doesn't matter

Post-Printing

Glue it together

I have hot glued both halves to the bare plug. If you have a better option just leave a comment :D