Die Lötrauch Absaugung wurde während eines Twitch Streams entworfen, modelliert und aufgebaut. Von der Absuagung gibt es eine Version mit und eine ohne Beleuchtung. Im gezeigten Beispiel habe ich einige Teile CNC-gefräst, es kann aber auch alles Gedruckt werden.
(die Anleitung kann auf den Projektbildern nachvollzogen werden)
Druckdaten:
- PETG oder PLA
- Schichthöhe: 0,2 mm
- Infill: 15%
- Schichten oben und unten: 4
- Wandlinien: 4
- Stützstruktur: größtenteils keine / teilweise konzentrisch
Benötigte Materialien für Absaugung “ MIT ” Beleuchtung:
- PETG oder PLA (optional für Frästeile: fluoreszierendes Acrylglas 30cm x 15 cm)
- 2x Gewindeeinsatz M5S x 5,8 mm (Schmelzgewinde)
- 2x Rändelschraube M5 x 10 mm
- 8x Gewindeeinsatz M4 x 8,1 mm (Schmelzgewinde)
- 8x Linsenkopf Schraube M4 x 25 mm
- 2x 3 Leiter Verbindungsklemme
- 1x Anschlusskabel mit Fußtschalter
- 1x Lötschwamm, Aktivkohlefilter 12 cm x 12 cm
- 1x AC Lüfter 220V, 120mm x 38mm (wie "GDSTIME AC 220 - 240V 120 x 38mm Lüfter)
- 1x 12V LED Netzteil 100 x 50 x 10 mm (wie “conecto LED Netzteil 12V, 6 Watt - Slimline”)
- 4x 100 mm 12V LED Streifen, 10mm breit
- 1x 10 cm Schrumpfschlauch, Durchmesser 6.0/3.0
Benötigte Materialien für Absaugung “ OHNE ” Beleuchtung:
- PETG oder PLA (optional für Frästeile: fluoreszierendes Acrylglas 30cm x 15 cm)
- 2x Gewindeeinsatz M5S x 5,8 mm (Schmelzgewinde)
- 2x Rändelschraube M5 x 10 mm
- 8x Gewindeeinsatz M4 x 8,1 mm (Schmelzgewinde)
- 8x Linsenkopf Schraube M4 x 25 mm
- 2x 2 Leiter Verbindungsklemme
- 1x Anschlusskabel mit Fußtschalter
- 1x Lötschwamm, Aktivkohlefilter 12 cm x 12 cm
- 1x AC Lüfter 220V, 120mm x 38mm (wie "GDSTIME AC 220 - 240V 120 x 38mm Lüfter)
Druckliste für Absaugung “ MIT ” Beleuchtung:
- 1x L_Gehaeuse.stl
- 1x L_Filterhalter.stl
- 1x L_Deckel.stl
- 1x L_Blende.stl (optional)
- 1x L_Grundplatte.stl
- 2x L_Fuss.stl
- 2x L_Abstandhalter.stl
Druckliste für Absaugung “ OHNE ” Beleuchtung:
- 1x Gehaeuse.stl
- 1x Filterhalter.stl
- 1x Deckel.stl
- 1x Blende.stl (optional)
- 1x Grundplatte.stl
- 2x Fuss.stl
- 2x Abstandhalter.stl
→ENGLISH VERSION ←
The solder fume extractor was designed, modeled and built during a twitch stream. There is a version of the extractor with and without lighting. In the example shown, I have milled some parts, but everything can also be printed.
(The instructions can be traced on the project images)
Print data:
- material: PETG or PLA
- layer height: 0,2 mm
- infill: 15%
- top and bottom layers: 4
- wall layers: 4
- support structure : mostly none / partly concentric
- support structure : mostly none / partly concentric
Required materials for extractor “WITH” lighting:
- PETG or PLA (optional for milled parts: fluorescent acrylic glass 30 cm x 15 cm)
- 2x Threaded insert M5S x 5,8 mm
- 2x Knurled screws M5 x 10 mm
- 8x threaded insert M4 x 8,1mm
- 8x Pan head screw M4 x 25 mm
- 2x 3-conductor Splicing Connector
- 1x Connection cable with foot switch
- 1x Soldering sponge, activated carbon filter 12 cm x 12 cm
- 1x AC fan 220V, 120mm x 38mm (like "GDSTIME AC 220 - 240V 120 x 38mm fan)
- 1x 12V LED power supply 100 x 50 x 10 mm (like “conecto LED power supply 12V, 6 Watt - Slimline”)
- 4x 100mm 12V LED strip, 10mm wide
- 1x 10 cm shrink tube, diameter 6.0/3.0
Required materials for extractor “WITHOUT” lighting:
- PETG or PLA (optional for milled parts: fluorescent acrylic glass 30 cm x 15 cm)
- 2x Threaded insert M5S x 5,8 mm
- 2x Knurled screws M5 x 10 mm
- 8x threaded insert M4 x 8,1mm
- 8x Pan head screw M4 x 25 mm
- 2x 2-conductor Splicing Connector
- 1x Connection cable with foot switch
- 1x Soldering sponge, activated carbon filter 12 cm x 12 cm
- 1x AC fan 220V, 120mm x 38mm (like "GDSTIME AC 220 - 240V 120 x 38mm fan)
Print list “WITH” lighting:
- 1x L_Gehaeuse.stl
- 1x L_Filterhalter.stl
- 1x L_Deckel.stl
- 1x L_Blende.stl (optional)
- 1x L_Grundplatte.stl
- 2x L_Fuss.stl
- 2x L_Abstandhalter.stl
Print list “WITHOUT” lighting:
- 1x Gehaeuse.stl
- 1x Filterhalter.stl
- 1x Deckel.stl
- 1x Blende.stl (optional)
- 1x Grundplatte.stl
- 2x Fuss.stl
- 2x Abstandhalter.stl