Abarth / Fiat 500 Biposto style vents for PH3 & PH4

Compatibility 
Ph3 horizontal or Ph4 vertical oem fiat 500/595 vents. 

Print
Print one with vertical symetry to get the 2nd side.
Use ASA or ABS for hot days…

For phase 4 only, you will need to apply a scale multiplayer because the oem vents are slighly bigger. You need to add 12mm to the whole part.

Assembly 
To use it : You need to pull the oem vents from your car and disassemble the chrome cover with a knife or a flat screwdiver. Remove the top part of the cover before the bottom.
Then remove all the vents flaps and install the printed part.