6d6178

@6d6178

A mounting system for IKEA SKÅDIS that makes designing and printing SKÅDIS accessories much easier and very sturdy.

3,147

13 k

82 k

updated April 25, 2026

khord

@khord

Amazing solution for mounting non-printed parts. Walls around the M2 nut opening didn’t quite come out uniformly, but no issues with functionality. Might try M2.5 next time if I get the hardware for it.

6d6178

@6d6178

Awesome, thanks for showing an example of a non-printed part! Super cool to see and it came out looking really great!

For me personally the M2 version prints fine but it's indeed a very thin wall. I use the M2.5 most of the time. If you have some patience, on Aliexpress you can buy hundreds of M2.5 nuts and screws for just a couple bucks.

Check out the various remixes. There are remixes that have an open M2 nut pocket or use heat-set inserts or directly screw into the plastic. Maybe one of those works better for you.

Thanks for sharing!

Jorge Ballester Dolz

@JorgeBallest_4608576

Sin lugar a duda, la idea más brillante para tableros skadis. Enhorabuena al diseñador!

Thanks

Awesome design, thanks for your work on these.

drunkrhin0

@drunkrhin0_1225752

Great system and love the kit card style STL ready to go

Note: does not like cheap AliExpress M2 nuts 😂

GabC

@GabC

Works pretty well although it's somewhat finicky to get the nuts to rotate properly and grab at the same time. Used it with a magnetic tool holder and will probably make more accessories to work with this.