Evolution Table Saw Switch Cover

This 3D printable object is a switch cover for an EVOLUTION RAGE5S 255MM 1500W MULTI-PURPOSE TABLE SAW. I was always…
7
63
0
389
updated June 19, 2022

Description

PDF

This 3D printable object is a switch cover for an EVOLUTION RAGE5S 255MM 1500W MULTI-PURPOSE TABLE SAW.

I was always searching for the small red stop button and needed to take my eyes off the workpiece which to me posed a serious safety issue. I decided to make a switch cover with a large flat surface that I could easily find and power off the table saw without looking for the button. It has been a very good addition to my saw.

Fit it to the saw by drilling screw holes on either side of the on/off switch enclosure.

DISCLAIMER: Use at your own risk.

Update 20/12/20: Included Fusion 360 file.

Update 15/02/20: Reoriented model for easier 3D printing.

Print Settings

Printer Brand:

Creality

Printer:

CR-10

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

50%

Filament: eSun PLA+ 1.75mm Red


Notes:

Print with the large surface flat on the print bed. No supports required.

How I Designed This ===================

Design process

  1. Took some basic measurements
  2. Designed prototype using Fusion360 Printed the prototype and performed test fit Tweaked design Printed final design and fitted

Category: Tools

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License