d4Rk cH4RG3r

Super Mario Bros. Charger for iPhone 12 (Pro) w/ case, Air Pods Pro and Apple Watch.

I cut everything into pieces, to be able to fit them on the printer and also to avoid needing supports on any visible surfaces. So just glued everything together.

TODO: Bottom plate is not yet there, not sure how I mount it (just glue it?)

Parts

• Apple Watch Charger (e.g. https://www.amazon.de/gp/product/B08MYN8SNZ, actually this one gets really hot and charges rather slowly, so would recommend the Apple original one)
• Power Supply (5V, 30W, maybe 20-25W are also sufficient) (e.g. https://www.amazon.de/gp/product/B07P8HKFLL)
• Socket for power supply (e.g. https://www.amazon.de/gp/product/B009PH1J5Y)
• Qi-Charger (2x, e.g. https://www.amazon.de/gp/product/B079GQVGP3) Just ensure the PCBA is not too large (which is hard to tell here, so maybe better purchase just the electronics with coils from eBay or Ali-Express)
• Soldering iron / some wire for electric installation
• Superglue for putting the things together and fixing the coils etc.

Print Settings

Printer Brand:

FlashForge

Printer:

Creator Pro

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

0.1

Infill:

15%

Filament: FilamentWorld PLA White