This is my first work with Fusion 360.
The result is this HEPA filter for the Printer/Prusa Box. The Hepa filter is for a 120 mm Fan.
I use the filter set from Printerbox.
https://www.printer-box.com/product/hepa-carbon-filter-1-set/
The lower part of the box (Hepa filter) is held with 12 magnets on the fan housing.
This makes maintenance very easy.
There are also 3 magnets, on the fan housing to make mounting a little easier. But these are not a must he an Option.
Infill: 20%
Perimeters: 3-4
PETG
Setting: 0.20 mm Quality
Support is needed for the air outlet.
You need :
The author hasn't provided the model origin yet.