I was searching for a larger electronics case for my Prusa MK2.5S and found this XY case by Carter : https://www.printables.com/model/1910-yz-case
I was not sure if it would fit on the MK2.5S, so I decided to redesign my own case in Onshape.
All parts are printer in PETG. Minimal supports are required to print the base.
For the assembly, you will need some M3 brass inserts in most locations as well as some normal M3 nuts and screws.
You can get the 3Dmodels in onshape from the following link :
https://cad.onshape.com/documents/4c4a41f7104d4f632d96a985/w/6f616a49e4eb4f8a129eb47f/e/ebb33482a662fd58b2cc782a?renderMode=0&uiState=62ab805542cf476aed957b60
The author hasn't provided the model origin yet.