Hot Shoe Cover minimalistic (internal flash working) V1.4

I like to keep things clean and protected, that's why I printed a hot shoe cover a while back then. This worked fine, but the cover did not only cover the hot shoe but also a little mechanism that tells the camera not to allow a usage of the internal flash… I mean the internal flash is not often used so it shouldn't be a problem, but in some cases, it is just uncomfortable to remove the hot shoe cover and to put it on again (considering that some people like me drop those little things easily). In order to solve that problem, I designed a hot shoe cover which doesn't trigger the unwanted mechanism and also looks quite good (well at least it got the flavor of mine).

Tip: print it with a brim and the triangle pointing upwards (in direction z axis)

I really hope this model solves your issues with the hot shoe as well and please let us know on which Canon model it did work. Also, if you got suggestions or if the cover doesn't cover a specific Canon Eos/M model → feel free to get in contact with me! 

Fits also:

• Panasonic FZ-2000 (thx to LK74 for testing (V1.2)) 
• Canon EOS 1100D (V1.4)
• Canon EOS 40D (thx to Nem)
• Canon EOS 80D (thx to luq0)
• Canon Eos 7D Mk2 (thx to Bond)

This is version 1.4