gap precision test 0.15 - 0.8 mm for printer and slicer tuning

Fast low filament consuming clearance or tolerance test for printing small gaps.

Used to help tune printer and slicer software.

overall dimensions 21.6mm x 5 mm x 1mm

The first gap is 0.15mm the next is 0.2, 0.25, 0.3 and so on until 0.8 mm.

Each gap is spaced 1mm edge to edge from the next gap.

The image provided compares 2 different slicers on an otherwise identical setup:

CR-10

black generic PLA

Left side sliced with Mattercontrol

Right side sliced with PrusaSlic3r