Automatic Smart Plant Pot - Arduino, Self Watering, Project

Print, assemble and program your own intelligent Smart Plant Pot. With a hidden water reservoir, pump and sensors why not make your plant care easy.

With an Arduino Nano at its core this project uses a water level sensor to let you know when to refill the concealed tank and a solid moisture sensor to figure out when to water your plant based on its needs.

Print instructions

Here is the video instructions for assembly: https://youtu.be/T_tpKoNCVYw

==========
CORRECTION: 4:05 into the video I incorrectly say to use 20cm wires to connect the water level sensor. The correct length is 35cm.

List of items used in this project and where to find them (the links are Amazon affiliate links and help to support this channel at no cost to you):

■ Arduino Nano: https://geni.us/ArduinoNanoV3
■ Mini submersible pump: https://geni.us/MiniPump
■ 5mm tubing: https://geni.us/5mmTubing
■ Transistor: https://geni.us/2npn2222
■ Resistors (1k and 4.7k): https://geni.us/Ufa2s
■ Wire: https://geni.us/22AWGWire
■ 3mm LED: https://geni.us/LEDs
■ Water level sensor: https://geni.us/WaterLevelSensor
■ Nuts and Bolts: http://geni.us/NutsAndBolts
■ Soil moisture sensor: https://geni.us/MoistureSensor
■ Half Perma-proto board: https://geni.us/HalfPermaProto
■ PLA Filament: https://geni.us/PLAFilament

■ Battery powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Battery powered soldering iron: http://bit.ly/SealeySDL6

==========

The code can be downloaded from here: https://github.com/DIY-Machines/Smart...

==========

SAY THANKS:

Buy me a coffee to say thanks: https://ko-fi.com/diymachines
Support us on Patreon: https://www.patreon.com/diymachines

SUBSCRIBE:
■ https://www.youtube.com/channel/UC3jc...

INSTAGRAM: https://www.instagram.com/diy_machine...
FACEBOOK: https://www.facebook.com/diymachines/

Disclaimer:
This video is shared for demonstration purposes only.