35mm Film 4x Canister

a case to store 4x 135 mm Films
In the contest Cameras And Accessories
28
89
2
555
updated June 14, 2022

Description

PDF

This is a Case for four Rolls of 35 mm Analog Film (135).

One edge has a cutout so the film fits snuggly inside and doesn't wobble around.

It holds rolls with the leader sticking out.

Film is not dead!!!

I originally uploaded this model to a different 3D Printing Things Site, but for the Photo Challange i thought i would also add it here.

 

How to print:

Support for the Container itself is not necessarily needed. This depends on how well your printer can print the filleted edge on the bottom.

For the Lid you definitely need support as i recommend printing it facing the bottom down on the build plate so you will get a nice top finish.

The Lid fits tight onto the container, the tolerances in the design are 1 mm in the lengthy direction and .5 mm from front to back.

If you have too little or too much play, scale the part(s) up or down a tiny bit in the slicer and it should work.

Tags



Model origin

The author hasn't provided the model origin yet.

License