Parametric Vase-Mode Drawers with Dividers

After printing a couple of drawers from https://www.thingiverse.com/thing:2857697 and other remixes.

I found that salfter had done a OpenSCAD implementation, https://www.thingiverse.com/thing:3135777.

Since I really wanted to select how many Y divisions I could have on the drawer and I really wanted to seal the handle hole (to hold SMDs), I lost a couple of minutes and added both those options to the file.

Still only tested with the medium sized drawers (40x20x80), but at 0.28mm you can print a lot of drawers fast.

Side bonus: if you print this with some translucent/clear filament you can remove the tag holder and use the pocket created by the extra wall to stick the tag!

TODO:

• Add x divisions
• Better indent the code

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

280

Filament:

Tucab Fil3d PLA 4032D

Natural

Notes:

Post-Printing =============

Category: Tool Holders & Boxes