To learn more check out my video about LED Panels:
Hi everyone!
This is my project of a compact DIY Led Panel that can be printed
as one piece on any 220x220 printer bed. I decided to make it because
I lacked enough light sources for making my videos.
Now I use this panel every time I need to record something and
even though it consumes just 25W it is just as bright if not
brighter than my 85W softbox lamp.To build it you will need
just a thin piece of steel and some LED strips so the total cost
is pretty low for such a bright light source.
For my panel I used
-1x 5m LED SMD5630 spool ( I used just 9-20cm strips so the total length is 1.8m, but I don't think you can get smaller spools. You can stick more strips but keep in mind that it will generate more heat as well)
-1x 180x200mm thin steel sheet (Download .STEP file for more precise dimensions)
-Some electric wires and power switch
-Some M3 screws
-3D Printed Case ( I used White PETG)
If you want you can also add a PlexiGlass panel with the cover or print a tripod adapter. For more details check out my video about LED Panels
The author marked this model as their own original creation.