(This is under revision due to several issues a newer version is on the way )
A simple filament guild for the Snapmaker 2.0 also works with the enclosed
Hardwear needed
M4 x 8mm (2X)
Printer:
Snapmaker 2.0
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.15-0.2
Infill:
20-30
Filament:
General Any Post-Printing =============Best printing orientation, no support is needed
Category: 3D Printer AccessoriesThe author marked this model as their own original creation. Imported from Thingiverse.