Ultimaker 2 flat feet (anti-vibration)

Flat feet to put under Ultimaker 2 to reduce noise.

These feet provide a flat surface that is then easier to soften to isolate vibrations.

I used some 3M "Multi Purpose Sealing and Insulation Tape" under the feet for soft cushioning.

Also printing the feet from Ninjaflex or some similar material might work, but I didn't have any.

Print Settings

Printer Brand:

Ultimaker

Printer:

Rafts:

No

Supports:

Resolution:

0,2mm

Infill:

Notes:

More or less default settings. Some leftover Ultimaker PLA.