Pi4 PoE+ SSD Case

This case is designed to hold a Pi-4 with PoE+ Hat as well as a standard 2.5” SATA SSD. Sometimes it’s useful to be able to boot your Pi from a SSD rather than an SD card. 

Attach the PoE+ Hat to the Pi-4 using the provided screws and spacers. The Pi will then sit in the case beside the SSD. They are both a snug fit and need to be pressed in. 

If you have some clear 1.75mm filament, you can add a couple of light pipes to extend the LED’s to the outside of the case. 

Then the lid just clips on top. No screws required. 

A SATA to USB3 cable connects the SSD to the Pi. The one I’m using here is from Startech, but there are plenty of others. 

I wanted this for my Pi-Hole, so included the Pi-Hole logo on the top, just for fun. There’s also a version of the lid without the logo if that’s more your liking.

I've also created a PoE+ version that exposes the HDMI and audio ports as well as a version that doesn't use the PoE+ Hat.