Hexagon Toothbrush Holder - Magnetic Under Vanity

Print settings:

• Nozzle: 0.4mm
• Layer Height: 0.2mm on base and .15 on legs (larger may be fine)
• Supports inside leg holes on the base and magnet holders (all included in 3mf files). 

Make sure you remove all supports from inside the leg holes otherwise they won't fit correctly. Two slots are provided to help remove them but suggest using tweezers or needle nose pliers to get any remaining support material.   

Requires ≥ ~3 inches of clearance between the wall and front of the vanity and the surface it's adhering to should be magnetic.

(2x) Magnet size is: 

• Imperial dimensions: 0.75 in. diameter x 0.125 in. thick
• Metric dimensions: 19.05 mm diameter x 3.175 mm thick

Complements the following toothpaste holder - https://www.printables.com/model/225258-hexagon-toothpaste-holder-magnetic-under-vanity