Date Reminder with changable sign

Date Reminder with changable sign

Simple date reminder with rolling number rings to remind you about the next important date. I use some of these for important appointments and for the next upcoming birthday…

The model is split in several parts to avoid the need of supports. Mounting it with the date ruler rings is very easy, because the left older part has a square post that is simply pressed through all the other 3 holder parts - after you put the rings in these holder parts first. ;)

The text of the sign can easily be changed with a multi coloured print with the colour change option of the Prusa Slicer.

The sign itself has the following dimensions and is 3mm thick and the height setting (here 35mm) is free to set up to your needs:

The holes in the base are a bit wider to put the sign easily in and out.

Optional in the number rings and the letters in the holder you can put the extra letters/numbers in a different colour as shown in the pictures to get a better contrast. A pre sliced .gcode file for all of them is included and the inlays just need to be pressed into the rings and the holder. The inlays are 0.1mm smaller than the numbers on the inside and outside edge. I did not need any glue for this model. It just needs some time to press them in. In the pictures it is not the final result. 

Printing instructions:

• 0.2 speed profile 
• A 5mm brim was used around the signs to avoid warping 
• No supports needed for any part
• The small letter inlays were printed with 100% infill

Note: In year 9999 you may write me a message and I will add a 5th digit to the year section as a variant. ;)

Happy printing :)