Punisher Foregrip AR15

I modeled the Punisher Skull and added it to the Short 2 IPT file in this source. https://www.thingiverse.com/thing:580466

I found this one https://www.thingiverse.com/thing:2742432 on here, But my slicer didn't like it so I made one. I didn't use this one for anything but the design Idea.

I added a .2 tall sections across the slit in the rail slot to help bridging in those areas, you will need to remove these after printing as they are only there to help reduce the need for supports. See the picture with the red circled areas.

• Update 2/7/2020 :
  It was brought to my attention that not all rails are alike, so I extended the original file from 76.7mm to 79.7mm center to center between mounting holes to accommodate the difference.
  Short_2_punisher 2 - has 76.7mm center to center holes
  Short_2_punisher 80mm - has 79.7mm center to center holes

Print instructions

Category: Toy & Game Accessories Print Settings

Printer Brand: Prusa

Printer: i3 MK3S

Rafts: Doesn't Matter

Supports: Doesn't Matter

Resolution: .2

Infill: 30%+

Filament: Filament One PLA Glint Silver
Notes:

I just printed this in PLA as a test print, I'd suggest a minimum PTEG