RotorHazard / Delta 5 Timer Case

I couldn't find any cases that matched my criteria so I designed my own.

1. Access to ALL ports on the Pi 3b+
2. Simple to assemble
3. Small as possible (with preference to low instead of thin
4. simple to print
5. Holds Delta 5 / Rotorhazard board securely

What this case does not do:

1. No support for POE
2. No support for voltage display or alarm
3. No built in battery
4. No fans.

I run it with a 3s 2200 mah battery that i plug a voltage alarm into when at the field.

At home I plug it into an old laptop powersupply (12v x 5A)

You will need 9 screws: M3x4mm.

One of these (I printed using flexible filiment): https://www.thingiverse.com/thing:3968167

Print Settings

Printer Brand:

Wanhao

Printer:

Rafts:

No

Supports:

Resolution:

.2

Infill:

Filament: Inland PLA