DYMO Key Tag

This is a simple key tag for naming your keys. Has a 35x9mm slot where you can attach a classic DYMO label with your own or a friend's name. Fits approximately 5-6 characters.

Assembly:

• Print out with included gcode file on Prusa Mini or slice the STL file yourself. 
• If you have trouble with bed adhesion, try printing with brim.
• Print out the label on a DYMO or similar label printer and cut to size (35x9mm)
• Attach to your keys using a key ring or rubber band.

I recommend using a layer height of 0.10mm to get nicer chamfers, but 0.20 works too if you prefer even faster print times. Good luck and happy printing!