Lithophane Stand

I made this stand for the square lithophanes created with the Lithophane Maker (100mm wide 7.5mm deep)

The hole will fit a light like this one (UK) (3cm in diameter) or this one (US)

For batteries you can use Rechargable battieries (UK) or Rechargable battieries (US)

Print Settings

Printer Brand:

TEVO

Printer:

Tornado

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

20%

Filament: SUNLU PLA+ White

Notes:

I've printed it with PLA+ but any material is good. I've already added 0.3mm tolerances for the slot and the light hole.