Filament feed tube merger 6mm

This is a remix from Robinder's tube merger https://www.thingiverse.com/thing:3676326

I built a 3 spool dry box with oversized feed tubes (OD=6mm, ID=4mm). This remix merges 3 tubes instead of 4 from the original design.

Printed mine with 6.3mm hole diameter for the feed tube but the tube was loose inside the exit hole. Redesigned with 6.2mm hole so hopefully it fit better.

Can be printed without support.

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3 v2

Rafts:

Doesn't Matter

Resolution: 

0.28

Infill:

25%

Filament:

Smith3D PLA+ / PLA Pro

Light Blue

Notes:

0.4mm nozzle.

Printed with CHEP's FF fast 0.28 profile.

You can print with normal speed at 0.2 layer height and more infill if you want

Custom Section

Option #1: Filament spool rod hanger

The hanger is a design remix to fit OD=43mm pvc tube to be used with button head screws.

Hardware required:

m4 x12mm button head screws x6

m4 nuts x6

Print without support.

The file to this thing can be found here: https://www.printables.com/model/222161-filament-rod-43mm-hanger