Filament spool rod (43mm) hanger

Filament spool rod hanger (remix from Robinder's spool rod hanger https://www.thingiverse.com/thing:3676334)

The hanger is designed for OD=43mm pvc tube to be used with button head screws.

Hardware required:

m4 x12mm button head screws x6

m4 nuts x6

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3 v2

Rafts:

Doesn't Matter

Supports: 

No

Resolution:

0.28

Infill: 

25%

Filament: Smith3D PLA+ / PLA Pro Light Blue

Notes:

0.4mm nozzle.

Printed with CHEP's FF fast 0.28 profile.

You can print with normal speed at 0.2 layer height and more infill if you want

Custom Section

Optional #1: Filament feed tube merger 6mm

I built a 3 spool dry box with oversized feed tubes (OD=6mm, ID=4mm). This remix to Robinder's original design merges 3 tubes instead of 4 from the original design.

Printed mine with 6.3mm hole diameter for the feed tube but the tube was loose inside the exit hole. Redesigned with 6.2mm hole so hopefully it fit better.

Can be printed without support.

The file to this thing can be found here: https://www.printables.com/model/222162-filament-feed-tube-merger-6mm