CalDigit TS4 Bracket

Need to mount your shiny TS4 under your desk or monitor stand? This print will do the trick.

Once the bracket is mounted, the TS4 can be easily slipped in and out via the integrated retention clips. Simply attach the cables to the back and slide the TS4 into the bracket.

Mounting Instructions:

1. After printing the left and right brackets, disconnect your TS4 from power and all cables
2. Place a strip of double sided tape on the screw-hole side of the brackets
3. Place the brackets on the TS4, and place the assembly in it's mounting location
4. Gently remove the TS4, leaving the brackets temporally mounted with tape.
5. Mark the holes and attach with a 6 screws
6. Reinsert the TS4!

The brackets are designed to be mounted with #6 x ½ inch wood screws.