Pollet - 3d printed rugged and slim wallet

DESCRIPTION

• An extra portable wallet that I designed which is easy to print, stylish and built like a rock.
• Dimensionally it is almost the same height and length as a credit card. Approximately 1.5cm thick.
• Storage: Holds 5 cards. It also has an extra storage compartment that can store cash and coins or suit any of your other storage needs. It has capacity of more than 15 us dollar sized bills.
• DOES NOT require any bolts or rubber bands to assemble. Prints in 2 parts: Card holder + cash lid

PRINT SETTINGS

• Layer height: 0.2mm
• Nozzle diameter: 0.4mm
• Infill percentage: 20% - 100%
• Wall line count: 3
• Supports: NONE
• Material: PLA
• Weight: 39gm
• Printer: Ender 3 v2

- Print Time: 5 hrs.

PRINT INSTRUCTIONS 

• Print in the same orientation as in the Cura screenshots.
• If the lid is too tight, insert a coin in the slit and pull.
• Turn supports OFF in your slicer settings.
   

DIMENSIONS : 16.9 x 58.7 x 90.5(mm)

======================================================================

I have been using this wallet for a month now. It is far more portable than my old leather wallet. It also has capacity for more bills as compared to other 3d printable options. Contact me if you have issues with the tolerances on the cash drawer lid. I will be happy to help out:)

You can contact me on my email: [email protected]