Lighter plug eject button

Two part thingy: eject_knob.stl is the main part with cutouts for the letters; eject_letters.stl is a separate file…
17
153
1
831
updated May 2, 2020

Description

PDF

Two part thingy: eject_knob.stl is the main part with cutouts for the letters; eject_letters.stl is a separate file with the letters in 5 slightly different sizes so you can pick the ones that fit best for your printer. I used gray letters with black plug to fit the interior of my MR2 Spyder. Print this and ask your date to behave. (Recommended for convertibles only. Author not responsible for hard-top vehicle injuries.)

Print instructions

Category: Automotive Print Settings

Printer Brand: MK3

Printer: Prusa i3

Rafts: No

Supports: Yes

Resolution: 0.15

Infill: 20%

Filament: MG Chemicals PETG Black
Notes:

Used Black PETG for main plug and used gray PLA for inner letters. Letters are provided in STL at five different sizes to account for differences among printers for how accurate the letter cutouts are compared to the printed letters. Pick the letter size that fits best after you print. I super-glued the letters into the slots and then sanded smooth.

Post-Printing

Super-glue the letters into the slots and sand smooth.

How I Designed This

Designed in Sketchup (free online version).

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License