Hello My Name Is

This name tag is custom configured in the slicer, using a frame stl and individual letter stl files:

1. Drop the frame part into the slicer, then the individual letters you need. 
2. Arrange them, scale them, whatever you like, just make sure they're attached to each other and/or the frame. 
3. When you're ready, select all of the parts and merge them (see the video below).
4. Slice the model as you like… maybe try a color change to make the text pop?

There are two cylindrical pockets in the back of the frame for ¼" diameter (6mm will work fine) magnets (I used 1/16" thick but almost any thickness will work, within reason). Glue those firmly into the pockets and use two more on the inside of your shirt to hold it on!