XT60H Circular Mount - Lack Enclosure

Like many, I got tired of having to undo the power wires at the power supply when I needed to work on the printer. I didn't like any of the other bulkhead type fittings for the XT60H connectors I had so I made my own. This fits 2 connectors for the 2 sets of power wires. The power panic wire I have running through a different grommet, so that still needs to be unplugged at the power supply for now. 

It is sized for a 1.25" through hole, so it can easily be installed with just a step bit. For use on the LACK enclosure you will need:

• Qty 2 M3 hex nuts
• Qty 2 M3x15 (or longer) SHCS

It also is helpful to have a 40mm+ length M3 bolt to help seat the nuts